Infrared/thermal imaging Moisture & Building Inspections

City Line Ir uses Flir cameras, which are recognised as the world leader in Infrared/Thermal Imaging camera systems.

Flir started up 30 years ago and have been the pioneers in the commercial Infrared/Thermal Imaging camera industry.

The Flir P65 is the top of the range professional infrared/thermal imaging camera, giving our inspectors the best equipment to assess your systems and equipment.

Technical Specifications

  • Detector type: 320×240 (76,000 pixels)
    Focal Plane Array
    Uncooled Microbolmetor
  • Thermal sensitivity: >0.08°C at 30°C
  • Image Frequency: 50/60Hz non-interlaced
  • Spectral Range: 7.5 to 13°μm
  • Temperature Range: -40°C to 1500°C
  • Accuracy: ±2°C, ±2% of reading

To make an accurate comprehensive report, high quality thermography equipment is required. In many applications thermal sensitivities of less than 0.08°C are required to give clear definition of temperatures.

Our cameras are 320x 240 pixels that display 76800 pixels giving high image quality, and have thermal sensitivity less than 0.08°C. The use of world recognized equipment gives validity to our aim of producing high quality thermal inspections.

TroTec T660, A professional hand-held measuring device for non-destructive determination of moisture distribution in areas up to a depth of 4 cm from the surface. Data downloadable to computer.
TroTec T650, This dielectric meter is ideal for the quick and non-destructive determination of near-surface moisture distributions to up to 40mm.
TroTec T600, The instrument serves to provide rapid, non-destructive identifications of concealed distributions of moisture using the microwave method on materials up to a depth of 300mm.
Protimeter Surveymaster, This unique Surveymaster moisture meter has two modes of operation – search and measure.Search and measure help the user to distinguish sub-surface from surface moisture, essential information when trying to establish the extent and cause of a dampness problem.
Hammer Probe, Moisture Hammer Probe has 2 sharp pins for penetrating hard surfaces. Pins are 40mm long.
Carrel & Carrel C901 Moisture Meter, Self contained hand held resistance type timber moisture meter with provision for connection to a separate electrode
Humitest MC-50, For quick and accurate non-destructive determination of the moisture content in wood and building materials as well as locating wet areas in floors, roofs and walls made of homogeneous material.The field penetration depth is approximately 50 mm